❄️⚡ Electricity in winter: why bills go up and what really helps
Winter is the perfect time to think about your energy use! When the temperature drops, so do your heating hours, hot water and lighting loads. This means you could see a significant increase in your bill, even at the same "price per kWh". Check out the amazing transparent model of Spot + nettleie + VAT, the incredible consumption profile by type of housing and the top 3 measures that bring tangible savings! I'm thrilled to tell you that all inserts are codes for insertion, and they're all adapted for mobile devices!
🧾 Spot + nettleie + VAT: what your bill consists of
The bill structure is simplified: energy (spot/fixed × kWh) + network fee (nettleie: fixed + per kWh), plus VAT. Below is an interactive "summer/winter" calculation and visualisation by component.
Model simplified: parameters and compensation entered manually. For exact total, use your real values.
🏡 Consumption profile by type of housing
In winter, the share of heating and hot water increases. In a small flat, the main items are heating, shower/bath and kitchen; in a detached house with electric heating, heating dominates. Below is a simple profile: select the type of housing, area, type of heating and family composition; get an estimate of kWh/month and structure. You can enter the result into the bill calculator.
All calculations are approximate and depend on your tariff, network conditions, type of housing and habits. The compensation model in the insert is a demo, the parameters are set manually. This material is not financial advice; substitute your actual figures for an accurate assessment.
FAQ
First, record how many kWh are consumed in a typical winter month and compare it with the summer. If the kWh differ by 1.5–2 times, consumption is the main driver. If the kWh are stable, but the bill fluctuates, it is due to the price of energy and network charges. Breaking down the components in the calculator above helps you see the contribution of each part.
The rule of thumb "−1°C ≈ −5–7% on heating" is a working estimate. The effect depends on the type of housing and insulation, but as an inexpensive step, it is one of the most effective ways to reduce your winter bill without noticeable discomfort.
In apartments with electric panels, heating usually accounts for the largest share of the bill in winter, but hot water also contributes significantly, especially for families of 2–3 people who take long showers. Reducing shower time and using aerators can save money all year round, but especially in winter.
Yes, even if you do not have a time-of-day tariff, such a transfer unloads the network and helps to avoid peak loads at home. If there is an internal logic of "peaks" in the network tariff, the transfer can further reduce the bill.
Most quick measures do not require approval: thermostat settings, timers/sockets, seals, aerators, washing machine/dryer mode adjustments. Major changes (heat pump, insulation) must be agreed with the landlord.
Underfloor heating, boilers and dryers often run "by default", even when no one is home. Timers, schedules and energy-saving modes can reduce their consumption without radically changing your habits.
Probably, the initial share of heating/hot water in your profile is less than in typical estimates, or your home is already energy efficient. Use the housing profile and adjust the parameters — interactive inserts are designed for personal customisation.
